P7000 combines an RF signal check with a separate magnetic probe for vehicle and room inspections. The display shows a live waveform, while the indicator lights and sound respond as you adjust sensitivity. The supplied manual lists a 1500mAh battery and 8–15 hours of continuous operation.
| Model | P7000 |
|---|---|
| Detection modes | RF signal and magnetic probe checks |
| RF range listed by supplier | 1MHz–12GHz |
| Signal feedback | Waveform display, 10-level LED indicator and sound |
| Magnetic probe | Flexible probe with tip light; listed response range up to 150mm |
| Battery | 1500mAh rechargeable lithium-polymer |
| Listed continuous operation | 8–15 hours |
| Body size and weight | 145.6 × 74.3 × 29mm; 215g |
Trace an RF signal with the waveform display
Attach the RF antenna, turn on the unit and set the sensitivity until the waveform is readable. Move through the area and watch the indicator as signal strength changes. Lower sensitivity near a strong reading to narrow the search. Phones, Wi-Fi equipment and other ordinary transmitters also produce RF activity, so compare readings before examining a suspected object.
Check magnetic mounting points
Attach the flexible probe to switch to magnetic detection. Its tip light helps when checking dark gaps around a vehicle or equipment housing. Set the balance control so the indicator is near its starting point, then move the probe slowly around likely mounting locations. A magnetic response points to an area for closer physical inspection.
Check the exact set before ordering
The supplied imagery includes the detector, RF antenna, magnetic probe and charging accessories. Confirm the accessory set, charging connector, manual language and packaging with a sample. Test both modes in the intended environment, particularly around metal surfaces and nearby transmitters.
Wholesale price
These USD reference prices apply to one P7000 set. Send the order quantity, destination and required accessories for a final quotation. Shipping is quoted separately.
| Order quantity | Reference unit price (USD) |
|---|---|
| 5–49 units | US$82.72 per unit |
| 50–199 units | US$81.13 per unit |
| 200–499 units | US$79.54 per unit |
| 500+ units | US$78.58 per unit |
Frequently Asked Questions
What does the P7000 detect?
The RF and Magnetic Tracker Detector with Waveform Display – P7000 checks nearby radio transmissions with its antenna and uses a separate flexible probe to inspect for magnetic attachment. The waveform and signal indicators help locate a suspicious area. A silent transmitter may not trigger an RF reading, so inspect the object directly after narrowing the location.
How does the magnetic probe work?
The RF and Magnetic Tracker Detector with Waveform Display – P7000 uses a flexible magnetic probe with a light at the tip. Connect the probe, adjust the balance control and move the tip around likely mounting points. The supplier manual lists magnetic detection up to 150mm; actual response depends on the magnet and surrounding metal.
What is the listed battery life?
The RF and Magnetic Tracker Detector with Waveform Display – P7000 has a listed 1500mAh rechargeable battery and an 8–15 hour continuous operating range in the supplier manual. Operating time will vary with the display, alerts and battery condition. Charge a sample fully and test the selected mode for the length of the planned inspection.
Can P7000 identify a specific tracker model?
The RF and Magnetic Tracker Detector with Waveform Display – P7000 shows signal activity and supports a magnetic probe search. These readings do not identify the brand or model of a tracker. Normal phones, routers and nearby transmitters can also produce RF indications. Reduce sensitivity near a strong reading, then examine the suspected installation point directly.
What should be checked before a P7000 bulk order?
The RF and Magnetic Tracker Detector with Waveform Display – P7000 should be sampled with both the RF antenna and magnetic probe attached. Check the display, controls, charging lead, included accessories, manual language and packaging against the purchase order. The USD prices below use the supplied unit cost; confirm shipping and the final set in the quotation.
English 
Italiano 
Deutsch 
Français 
Español 
Polski