M8000 is a handheld detector with separate RF and magnetic-field checks. The short antenna is used to compare nearby radio signals; the flexible probe can check a suspected magnet-mounted tracker point. Its aluminum body has two adjustment controls and a 10-level LED indication. The supplier manual lists a 1500mAh rechargeable battery and a 125 × 52.5 × 21.5mm body.
| Model | M8000 |
|---|---|
| Detection modes | RF signal and magnetic-field checks |
| Listed RF frequency range | 1MHz–12GHz |
| RF indication | 10-level LED bar and changing audible alert |
| Magnetic-field check | Flexible probe with tip indicator |
| Battery | 1500mAh rechargeable lithium polymer |
| Listed continuous operation | 20–45 hours, depending on use |
| Body | Aluminum alloy, 125 × 52.5 × 21.5mm |
| Listed unit weight | 175g |
Follow an RF reading to its source
Fit the RF antenna, select RF mode and adjust the threshold until background signals are manageable. Move around the area and compare the LED bar and audible alert. As a reading strengthens, lower the sensitivity and inspect a smaller area. A phone, router or other ordinary transmitter can produce the same sort of response, so the reading alone does not identify a tracker or microphone.

Check a suspected magnetic mounting point
Switch to the magnetic-field mode and bring the tip of the flexible probe near a suspected mounting point. The probe reaches gaps and edges that are hard to inspect with the main housing. Metal parts and residual magnetism can affect the response; compare nearby positions and inspect the object before drawing a conclusion.

Plan the sweep and sample test
The supplier sheet lists 20–45 hours of continuous operation from the 1500mAh battery. Test both modes, the RF sensitivity and the magnetic probe on a sample under the intended working conditions. Confirm that the selected antenna, probe, charging cable and manual are included in the order. The four reference unit prices below use the M8000 cost at each quantity band.

Wholesale price
These USD reference prices are per M8000 unit. State the quantity, destination, packaging and required manual language for a matching quote. Shipping is quoted separately.
| Order quantity | Reference unit price (USD) |
|---|---|
| 5–49 units | US$63.10 per unit |
| 50–199 units | US$61.88 per unit |
| 200–499 units | US$60.67 per unit |
| 500+ units | US$59.94 per unit |
Frequently Asked Questions
What does the M8000 check?
The RF and Magnetic Tracker Detector with Dual Probes – M8000 has separate RF and magnetic-field modes. The RF mode compares nearby transmitted signals through an antenna; the flexible magnetic probe checks for a strong magnet at a suspected mounting point. A reading identifies a place to inspect closely, not a specific device by itself.
Can M8000 find a tracker that is not transmitting?
The RF and Magnetic Tracker Detector with Dual Probes – M8000 includes a flexible magnetic-field probe for checking places where a magnet-mounted tracker could be attached. That mode does not depend on a radio transmission. Metal parts and residual magnetism can also change the indication, so compare several positions and inspect any unusual point directly.
What are the M8000 battery and size?
The RF and Magnetic Tracker Detector with Dual Probes – M8000 is specified with a 1500mAh rechargeable battery and a 125 × 52.5 × 21.5mm aluminum body. The supplier manual lists 20–45 hours of continuous operation under its stated conditions. Confirm usable time on a sample with the mode and sensitivity planned for the order.
How should the M8000 RF sensitivity be set?
The RF and Magnetic Tracker Detector with Dual Probes – M8000 has an adjustable RF threshold and a 10-level LED signal indicator. Begin a sweep with the antenna fitted, then reduce sensitivity near a strong reading to narrow the search. Phones, Wi-Fi equipment and other known transmitters can also raise the indicator, so compare positions.
What should be checked before ordering M8000?
The RF and Magnetic Tracker Detector with Dual Probes – M8000 is a two-mode inspection tool with an RF antenna and flexible magnetic probe. Confirm both probes, the charging cable, manual language, packaging and the 1500mAh battery specification on a sample. Send the planned quantity and destination for a matching wholesale quotation.