The T01 Portable RF and Camera Lens Detector is a slim handheld tool for authorized room and equipment checks. Its telescopic antenna is used during RF scanning, while the red optical viewer and four LEDs support a separate manual lens search. The T01 manual describes a dedicated 2.4 GHz signal mode and an adjustable broader RF mode. The detailed supplier sheet lists a 500 mAh rechargeable battery, Type-C charging and approximately eight to nine hours of continuous use. A radio reading alone cannot identify a camera, so check the suspected spot with the optical viewer and a physical inspection.
- Inspection modes: RF signal search, optical lens check and magnetic-field check
- RF controls: Telescopic antenna and adjustable signal sensitivity
- Power: 500 mAh rechargeable battery; USB Type-C, 5 V / 1 A
- Working time: Approximately 8–9 hours after a 2–3 hour charge (detailed supplier sheet)
A Practical Room Inspection
Use the T01 only in a space you are permitted to inspect. Extend the antenna for an RF sweep, then reduce sensitivity as you approach a signal source. The manual also describes a separate 2.4 GHz mode. For an optical check, dim the room and look through the red viewing window while moving the detector across likely locations. The modes answer different questions; neither replaces a close visual check.
Front Controls and Optical Viewer
The front light bars show signal response. The MODE and power buttons select modes and adjust sensitivity; the manual says a long press of MODE can silence or restore the audible alert. The red window and four LEDs sit under the upper cover for lens inspection. Move slowly and look for a reflection through the viewer rather than relying on a single RF reading.
Battery, Charging and Housing
A Type-C port charges the built-in 500 mAh battery at the listed 5 V / 1 A input. Allow about two to three hours for charging; continuous use is listed at roughly eight to nine hours. The housing measures 28.5 × 16 × 112 mm. Runtime changes with mode and alarm use, so test a production sample before printing a fixed runtime on retail packaging.
Technical Specifications
| Specification | Listed value |
|---|---|
| Model | T01 |
| RF functions | Adjustable RF scan and separate 2.4 GHz mode (manual) |
| Optical check | Red viewing window with four LEDs |
| Additional mode | Magnetic-field check; test the selected batch |
| Battery | 500 mAh rechargeable |
| Charging | USB Type-C; 5 V / 1 A listed input |
| Charge time | Approximately 2–3 hours |
| Continuous use | Approximately 8–9 hours |
| Device dimensions | 28.5 × 16 × 112 mm |
| Retail pack | 130 × 80 × 25 mm |
| Master carton | 100 sets; 37 × 31 × 27 cm |
Inspection Limits
If a particular RF band matters for your order, ask QZT for the production batch specification. RF scanning depends on an active signal, while the optical viewer needs a line of sight; a silent or unpowered device may need a separate manual search. Test the selected batch against the signals and inspection conditions you expect to encounter.
Package Contents
The listed T01 package contains the detector, a USB charging cable, a user manual and a retail box. A wall adapter is not listed. Confirm the manual language and printed box for the selected batch before the order is finalized.
Ordering from QZT
Unit prices are shown for 5–49, 50–199, 200–499 and 500 or more pieces. Send QZT the quantity, destination and packaging language for a current quote. Freight, duties and changes to the listed package are separate. Request the batch documents if your market needs specific compliance paperwork.
| Quantity | Unit price |
|---|---|
| 5–49 pieces | US$6.54 per unit |
| 50–199 pieces | US$6.41 per unit |
| 200–499 pieces | US$6.29 per unit |
| 500+ pieces | US$6.21 per unit |
Unit prices exclude freight, duties and any requested changes to the listed package.
Frequently Asked Questions
Can the T01 check both wireless signals and camera lenses?
The T01 Portable RF and Camera Lens Detector has adjustable RF scanning and a separate optical lens-search mode. Its manual describes a 2.4 GHz signal mode, and the rear viewer works with four LEDs. A signal reading does not prove that a camera is present; inspect the location and test the chosen batch in its intended environment.
How long does the T01 run after charging?
The T01 Portable RF and Camera Lens Detector has a 500 mAh rechargeable battery and a Type-C charging port. Continuous use is listed at about eight to nine hours after a two to three hour charge. Runtime varies with the selected mode and audible alert use, so check a production sample before using one fixed figure on packaging.
What comes in a T01 retail box?
The T01 Portable RF and Camera Lens Detector is shown with a USB charging cable, user manual and retail box. The source material does not list a wall adapter. Specify the manual language and package version when requesting a quote, then approve a sample of the selected batch before finalizing bulk packaging.
How is wholesale pricing set for the T01?
The T01 Portable RF and Camera Lens Detector has unit-price bands for 5–49, 50–199, 200–499 and 500 or more pieces. The displayed amount is a reference unit price for the listed configuration; freight and duties are separate. Give QZT your quantity, destination and package requirements for a final quote tied to the selected batch.
English 
Italiano 
Deutsch 
Français 
Español 
Polski